![\"\"](\"http:\/\/www.jcfaudio.com\/site\/wp-content\/uploads\/2017\/04\/DA8-T-main.png\" "\\"ad8-lg\\"")
<\/p>\n<\/p>\n
The JCF Audio DA8-T<\/em> is an High-Resolution 8 channel Digital to Analog converter that can, as an option, use PEP<\/em>.<\/p>\n The unit receives the industry standard AES\/EBU protocol on four XLR connectors. The AES\/EBU inputs operate in single-wire mode exclusively at all sampling frequencies. The DA8-T can derive its sync source from an incoming bi-phase stream on XLR, a Word clock, or an incoming The DA8-T<\/em> has eight analog outputs that are floating and <50 ohms. Pin 1 of all of the XLR\u2019s on the unit are internally tied to circuit common. This should be kept in mind wiring systems together. The transformer coupled outputs can easily be interfaced with virtually any studio interconnection scheme while providing isolation and superb common-mode rejection figures essential for studio environments. The device is pin 2 positive for the analog outputs. The XLR inputs are 110 ohm floating inputs and do not have preferred polarity.\n\n<\/div>\n <\/p>\n MAX <\/p>\n Unit ships with level control yielding -18dBFS = +4dBu<\/p>\n<\/td>\n<\/tr>\n <\/p>\n 88.2kHz: 20Hz -0.1dB | 20kHz -0.1dB | 30kHz -0.7dB | 40kHz -1.2dB<\/p>\n <\/p>\n 176.4kHz 20Hz -0.1dB | 20kHz -0.1dB | 50kHz -2.3dB | 70kHz -3.8dB<\/p>\n<\/td>\n<\/tr>\n \/\/\/ 24-BIT 192KHZ 8 CHANNEL D\/A CONVERTER The JCF Audio DA8-T is an High-Resolution 8 channel Digital to Analog converter that can, as an option, use PEP. The unit receives the industry standard AES\/EBU protocol on four XLR connectors. The … Continue reading
\nOptical input.<\/p>\n\nDOWNLOAD MANUAL<\/a>
\nDOWNLOAD “About PEP”<\/a>\n<\/div>\n\n\nFeatures<\/h2>\n
\n
\nSpecifications<\/h2>\n
\n
\n Number of Channels<\/td>\n 8<\/td>\n<\/tr>\n \n D\/A Calibration Range<\/td>\n \n MIN
\n Level fully counterclockwise
\n 0dBFS = +13dBu | -9dBFS = +4dBu | -18dBFS = -5dBu<\/p>\n
\n Level fully clockwise
\n 0dBFS = +23dBu | -19dBFS = +4dBu | -18dBFS = +5dBu<\/p>\n\n Power Consumption<\/td>\n < 24 Watts<\/td>\n<\/tr>\n \n THD+N<\/td>\n \n (80k BW lim)
\n 1kHz -18dBFS yielding +4dBu : <= -60 dB (.07%) all sampling frequencies
\n 1kHz -8dBFS yielding +14dBu: <= -68 dB (.03%) all sampling frequencies\n\n\n <\/td>\n<\/tr>\n\n Frequency Response (relative to 0 @ 1k)<\/td>\n \n 44.1kHz : 20Hz -0.1dB | 20kHz -0.1dB<\/p>\n \n Shipping weight<\/td>\n 15 lbs. 30\u201dX 24\u201dX10\u201d<\/td>\n<\/tr>\n \n Max Dimensions<\/td>\n L: 10.31\u201d W: 19\u201d H: 1.74\u201d<\/td>\n<\/tr>\n Fuses:<\/td>\n 3x 500ma 5x20mm, inside unit
\n 1x 2A 5x20mm, inside unit
\n 1x 3A, 3AG Fuse holder external<\/p>\n<\/td>\n<\/tr>\n<\/table><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"